Don't wait! Now is the time to buy the affordable. flexible and versatile HTA tube hone machine at a low introductory price.


You don’t have to invest in large systems that tie up valuable floor space – not to mention valuable capital to get horizontal tube honing capabilities. Sunnen's new HTA tube hone is the first all-electric, lean design tube hone created specifically for hydraulic service facilities doing resurfacing and repair of actuators for construction, mining, farming, and forestry equipment.

The HTA is available in two models: the HTA-2000 [2-meter/6.56 ft stroke], and the HTA-4000 [4-meter/13.12 ft stroke]. Each is available in CE and non-CE models.  

Read more about the HTA in the Pipeline & Gas Journal.

This affordable and versatile system boasts many features found on high-end machines:

• Electromechanical Stroker And Spindle, features a Siemens servo stroker motor with belt drive for quiet and precise operation combined with a 3 Hp (2,24 kW) spindle unit.
  
  
• Auto Tensioning System includes a programmable auto tool feed that’s standard equipment on the HTA. However, the abrasives can also be fed up manually, if desired.
  
  
• Paper Media Coolant Filtration Unit has a 48 gallon (182 l) capacity, and comes standard with quick disconnects, casters for mobility, sight glass, and a manual paper bed filter to clean the oil. The unit is powered by a reliable, robust 15 gpm (55 lpm) centrifugal pump, is designed to be easy to maintain, and tucks neatly under the HTA’s frame.
  
  
• Standard, non-CE Guarding includes easily removable covers for each end of the honed part for safety and coolant splash retention.
  
  
• The Innovative Modular Workpiece Support handles up to 4,000 lbs (1815 kg).
  
  
• Siemens PLC with Touch screen controls the electrical functions of the system in conjunction with standard push buttons and a joystick. Dwelling in any part of the stroke is handled via the touch screen.
  
  
• The Stroker Joystick on the control panel allows the operator to move the honing tool over the entire stroke length to set the ends of the stroke during setup. The stroke control override allows short-stroking in any part of the bore to allow the clean-up of any tight spots.
  
  
• The Operator Station swivels for ease of setup and operation.
  
  
• Analog-Style Load Meter allows quick location of bore tight spots.
  
  
• Standard Universal V-Block Work Holding System provides flexible, quick fixturing of a variety of work pieces.