Gage Leasing
Do you have a short-term job that requires the need for additional gaging equipment? Or, do you require multiple gages and do not want to worry should a repair be needed? If so, leasing may be the perfect economical option for your facility.
Consistency doesn’t have to be costly. Sunnen is proud to offer our exceptional brand of gaging systems for lease to our US based customers at competitive rates. Our mechanical gaging systems are fully portable and take just minutes to set up. Any and all repairs are covered by Sunnen’s expert technicians. Contact your sales representative for more information about leasing Sunnen gages.
Sunnen Leasing (formerly KS&C) offers the PG-Series Precision Gages for lease. Setting Fixtures and Extension Fingers are also available as part of the leasing program. The one exception is that Extension Fingers for the PG700E and PG710E are not available for lease and must be purchased.
A standard gage lease is offered in one-year, renewable increments. At the time of termination, leasing customers will simply send back the used gage equipment to Sunnen, terminating the lease.
Shop-tough PG-series Bore Gages require no electricity, air, or special expertise for fast part checking of honing, grinding, boring, reaming and drilling operations, or for incoming part inspections. When used with Sunnen PG-series setting fixture ring gages, plug gages, jo blocks or micrometers are not needed.
Various models are available for gaging IDs from 0.090 inches to 2.90 inches.
The following PG-series models are available for lease:
| Product | Description | Diameter Range |
|---|---|---|
| PG-700 | Small Bore Precision Gage – 0.00005" increments | 0.090 in – 0.379 in |
| PG-710 | Small Bore Precision Gage – 0.0001" increments | 0.090 in – 0.379 in |
| PG-800 | Precision Bore Gage – 0.00005" increments | 0.370 in – 1.500 in |
| PG-810 | Precision Bore Gage – 0.0001" increments | 0.370 in – 1.500 in |
| PG-800M | Precision Metric Bore Gage – 0.001 mm increments | 9.4 mm – 38.1 mm |
| PGE-6000K | Precision Electronic Bore Gage – 0.000010 mm increments | 0.370 in – 1.500 in |
The following PG-series accessories are also available for lease:
| Product | Description | Diameter Range |
|---|---|---|
| PG-250 | PG800/PG810 Extension Finger Set | 1.500 in – 3.000 in |
| PG-400 | PG700/PG710/PG800/PG810 Setting Fixture | 0.090 in – 1.500 in |
| PG-400M | PG700/PG710/PG800/PG810 Metric Setting Fixture | 2.29 mm – 38.3 mm |
| PG-500 | PG800/PG810 with PG250 Extension Fingers Setting Fixture | 1.500 in – 2.900 in |
| PG-500M | PG800/PG810 with PG250 Extension Fingers Metric Setting Fixture | 37.7 mm – 74.3 mm |
| † PG-2090 | Auxiliary Face Plate | — |
† One PG-2090 Auxiliary Face Plate is furnished with each PG-500 Setting Fixture.
• PG-700 and/or PG-710 Precision Gage requires Accessory Gaging Fingers, which are available for purchase only. They are priced at $740.00 each set. Contact Sunnen for assistance in selecting the appropriate accessory gaging fingers.
Gage leasing maintenance & repair
The PG-Series gages are comparators that do not need to be calibrated annually. In some cases, setting fixtures may be purchased that will require calibration. With these, the ring that comes with the setting fixture can simply be removed and sent for calibration at a local calibration shop.
If a gage does happen to need repair during the lease, Sunnen will work with the lease holder to coordinate repairs.
Contact Sunnen for more information
You may call a customer service representative at 1-800-247-7098 or use the form below.
Please Note: This program is not available outside of the United States.